5707
Commento:
|
10230
ready for #70
|
Le cancellazioni sono segnalate in questo modo. | Le aggiunte sono segnalate in questo modo. |
Linea 1: | Linea 1: |
#acl GruppoAdmin:admin,read,write,revert GruppoEditori:read,write,revert GruppoFcm:read,write,revert -All:read -Known:read | #acl GruppoAdmin:admin,read,write,revert GruppoOperatori:admin,read,write,revert GruppoEditori:read,write,revert GruppoFcm:read,write,revert palombo:admin,read,write,revert new.life:admin,read,write,revert paolettopn:admin,read,write,revert Known:read All:read |
Linea 3: | Linea 4: |
= Testo inglese = | |
Linea 4: | Linea 6: |
== HowTo6 == | LibreOffice Part 23: Base Form Enhancements with Macros |
Linea 6: | Linea 8: |
=== Traduzione italiana === HOW-TO Scritto da Lucas Westermann |
by Elmer Perry |
Linea 10: | Linea 10: |
Questo mese ho intenzione di fare un passo ulteriore nel regno dei sistemi ed installare la nostra prima 'CLI' installer basato su sistema Unix. Installeremo FreeBSD 8.1 che potrete scaricare da http://www.freebsd.org/where.htm l. Cliccando sul link “[iso]” vi collegherete ad un server FTP, dove saranno presentate alcune opzioni per le immagini. Potrete scaricare l'una o l'altra, il DVD oppure i file "-discl.iso". L'immagine livefs è destinata per il recovery e la riparazione, non per l'installazione. Per maggiori informazioni sulle differenti opzioni dare un'occhiata qui: http://www.freebsd.org/releases/8.1R/announce.html. Scegliere una macchina con 512MB di RAM e 6GB di Hard Disk, ma sarete liberi di cambiare (aumentare o mantenere come sopra i requisiti minimi). Passo 1: Una volta avviata la macchina e selezionato il corretto file ISO, verrete salutati da FreeBSD |
For the previous four parts of this series, we have slowly built a database document using LibreOffice's Base module. We have a database with forms to enter our data, and queries and reports for extracting the data. We now have a usable document for recording our book library. However, our current design has one flaw we need to overcome. If we need to enter a new author or media type while we are in the books form, we have to close the book form and open one of the others. If we could enter new authors and media types directly from the books form, it would behave more like an application and make data entry even easier. We can accomplish this through a few short macros. The LibreOffice Basic language is very similar to other Basic languages, such as Visual Basic for Applications. To manipulate the underlying LibreOffice document, we access the Uno framework controlling the document. The Uno framework is quite complex, but I will explain, as best I can, the properties and objects we will use. The goal is not to teach you how to write LibreOffice macros, but how you can use them. Macro Security and Options |
Linea 22: | Linea 14: |
bootloader. Potrete lasciare scorrere il tempo o digitare 1 per fare il boot dal CD. | While macros allow us to do cool things in our documents, they can also cause problems. Some people use macros to compromise other people's systems, therefore, we need to take a few minutes to talk about macro security. Whether you are running LibreOffice on Linux, Mac, or Windows, malicious code in a macro can compromise your data and possibly your entire system. |
Linea 24: | Linea 16: |
Passo 2: Una volta che il CD sarà stato caricato, verrà chiesta una regione (fig. 1) e una cartina (fig. 2). |
Macro security in LibreOffice is simple. Tools > Options opens the Options dialog for LibreOffice. Under LibreOffice, select Security. Click on the Macro Security button to pop up the macro security options. You have four options. Never use the Low security option – it will run macros without asking you. I recommend the Medium security level. With this level, you are prompted whether to run the macros when you open a document containing macros. The High and Very High options require a certificate or folder you designate as trusted. While this is great, I believe nothing trumps the instincts of the user. You usually know whether you were expecting a document to contain macros. When in doubt, click No. Click OK to save your choice and OK to close the options dialog. Now, on to the fun stuff. The Macros |
Linea 27: | Linea 20: |
Passo 3: Ora vi trovate nel menù principale (fig. 3). Se questa è la prima volta che installate FreeBSD, raccomandiamo di andare nelle opzioni Standard, ma sarete liberi di scegliere anche altro (è dopotutto un sistema virtuale che può essere reinstallato numerose volte). |
We will write four macros for our database document. Three will deal with opening forms, and the last will update the list boxes for authors and media types. The general idea behind macros is to accomplish tasks that are not built into the program, or to simplify complex tasks. Our macros really accomplish both, as we will simplify the tasks of adding authors and media types and provide functionality not built into the program. Before we can begin to write our macros, we need a container to hold them. Macros are contained in a module. Modules can live in the program itself or within a document. Since our macros are specific to our database file, we will embed them in the document. Macros embedded in a document are available only when the document is loaded. Macros contained in the program are available as long as the program is running. Tools > Macros > Organize Macros > LibreOffice Basic. The LibreOffice Basic Macros dialog pops up. Select book.odb from the Macro from-list. Click the New button. A dialog pops up asking you for a name for the module. Name it FormCalls. Click OK. This brings up the LibreOffice macro editor. The macro comes with a default main subroutine. We will not use this subroutine. Highlight Sub main and End Sub and press the backspace key to delete them. Our first macro is a generalized subroutine for opening a form. A generalized subroutine is written for reuse. We will call this routine twice from other routines we write. Type this subroutine into the editor: {{{ Sub OpenAForm (FormName as String) Dim GetForm as Object GetForm = ThisDatabaseDocument.FormDocuments.GetByName(FormName) GetForm.Open End Sub }}} The first line of the subroutine is called the signature. The signature determines how the subroutine is called. A signature starts with the keyword Sub, which defines this call as a subroutine. Next, the name of the subroutine. In our case, OpenAForm is the name of the subroutine. Finally in the parenthesis, we have the arguments used when calling this subroutine. In our case, we have a variable named FormName which is a type String. In the second line of the subroutine, Dim is another keyword. Dim initializes a variable as a type, and, optionally, a value. We define a variable named GetForm as a type Object. The third line assigns a value to the variable GetForm through a chain of commands in the Uno framework. ThisDatabaseDocument refers to the currently open database document. In our case, book.odb. FormDocuments is a collection of all the forms in the document. Finally, GetByName retrieves a specific form object from the collection. Notice, we pass the variable FormName from the signature to this method. Once the call is complete, the variable GetForm is the object of the form name passed to the subroutine. The fourth line calls the Open method of the form. On the fifth line, we tell Basic this is the end of the subroutine with the command End Sub. We will call the OpenAform subroutine twice. Once to open the authors form, and once to open the media form. Add these two subroutines to your editor: {{{ Sub OpenAuthorsForm(oEv As Object) OpenAForm("Authors") End Sub |
Linea 30: | Linea 38: |
Passo 4: Una volta scelto di installare la versione Standard, apparirà un messaggio che spiegherà fdisk (fig. 4). Dato che questa è una macchina virtuale e non c'è nient'altro, va bene usare il comando “(A)ll”. Se volete installarlo sulla macchina attuale, suggeriamo di eseguire i passaggi in ordine per abituarsi. Il menù fdisk come si vede in fig. 5 è grazioso ed autoesplicativo - una volta che capirete le nozioni di base di fdisk. |
Sub OpenMediaForm(oEv As Object) OpenAForm("Media") End Sub }}} The signature on these two subroutines are a little different. Since we will call them from a control within a form, we need to pass the object making the call as an argument, even though we do not use it. The argument oEv is a reference to the object making the call. We will use this to our advantage later, in the last subroutine, but here we do it because it is required. These two subroutines are pretty simple. We just make a call to OpenAForm passing the name of the form we want to open, Authors or Media. The final subroutine deals with our problem of refreshing the data in the list boxes for authors and media when we add authors or media using the two subroutines above: {{{ Sub ListRefresh(oEv as Object) oEv.source.model.Refresh End Sub }}} Once again, since we will call this subroutine from a control, we need a reference to the control making the call. However, this time we will actually use the object. This subroutine makes a method call to the underlying model of the list box and refreshes the data in the list, thus updating our list of authors or media types. Save your module and close the Basic editor. Making Connections to Macros At this point, our macros do nothing. We need to connect them to objects in our form to activate them when needed. First, we will connect the open form subroutines to buttons in our form, and then we will connect the ListRefresh to the list boxes. In the database pane, click on Forms. Right-click the Books form and select edit. Add two push buttons to the form, one under the Authors table and another under the Media table. Right-click the button under the Authors table and select Control to bring up the buttons properties dialog. On the General tab, change the name to AddAuthors and the Label to Add Authors. On the Events tab, click the ellipses (…) button next to Execute Action – which brings up the Assign Action dialog. Click the Macro button to bring up the Macro Selector dialog. In the tree list under Library, select book.odb > Standard > FormCalls. Select OpenAuthorsForm from the Macro Name list and click OK. Click OK to close the Assign Action dialog. Close the buttons properties dialog. Do the same with the button under the Media table, only name it AddMedia, make the label Add Media Type, and assign the macro OpenMediaForm to the Execute Action event. Finally, we need to add the refresh subroutine to our list boxes. Right-click the Authors column in the authors table and select Column. On the Events tab, click the ellipse (…) button beside “When receiving focus”. In the Assign Action button, use the Macro button to assign the ListRefresh macro to the action. This will cause the list to update data from the Authors table when you click on a list box in the column. Do the same for the Media column in the media table. Save your changes to the Books form and close it. Testing Your Changes Any time we make changes to our forms, we will want to test them and make sure we got everything right, especially in cases where we have used macros. One simple typo could cause things to not work. Double-click the Books form to open it. Add a new book with an author and media type you have not added already. Click the Add Authors button to make sure it opens the form. Add some authors. Close the Authors form. Click on the authors dropdown list box and verify that the authors you added are there. Do the same test with the Add Media Type button and listbox. Final Thoughts and References Again, I would like to emphasize that writing macros in LibreOffice Basic is complex. Documentation is pretty sparse, but it is out there. If you are interested in taking up the challenge, here are some references to get you started: LibreOffice Basic Guide: http://wiki.documentfoundation.org/images/d/dd/BasicGuide_OOo3.2.0.odt Andrew Pitonyak's OpenOffice Macro Information: http://www.pitonyak.org/oo.php You can find the macros used in this How-To on pastebin.com at http://pastebin.com/MU2Ztizi Next time, we will move on to another part of the LibreOffice suite and explore the Math module. = Traduzione italiana = == Note alla traduzione == |
Linea 36: | Linea 77: |
VIRTUALIZZAZIONE - PART 4 Una volta completata questa attività dovrete decidere quale bootmanager vorrete installare. Se FreeBSD è la vostra scelta personale, la Standard è quella adatta e se farete installazioni multiple sul disco, sceglierete tra “BootMgr” o “None” (se avete già installato un boot manager di altro tipo). Vedere fig. 6. Quindi avrete bisogno di creare un gruppo di partizioni BSD all'interno della partizione fdisk creata da voi. Fondamentalmente dividerete le partizioni in parti del sistema BSD, Auto è adatto in quasi tutti i casi si possa pensare, a meno che ritenete di aver bisogno una parte extra/non aver bisogno di una parte. Inoltre provandolo su una macchina virtuale è meglio che pasticciare attorno ad un vero sistema. Passo 5: Adesso potrete scegliere quale pacchetto installare (fig. 7). Di solito si sceglie Custom, selezionare Base, kernels, dict, doc, docuser, games, man, catman, e le porte (vedere fig. 8). Una volta scelti i pacchetti da installare avrete bisogno di selezionare dove installarlo (fig. 9). Il CD va bene se si utilizza il disc1 o dvd1 ISOs, ed avrete necessità di usare l'opzione FTP per l'immagine bootonly. Inoltre se volete avere i pacchetti più aggiornati potrete usare anche le opzioni FTP. Se scegliete le opzioni FTP dovrete abilitare la rete e selezionare un sito FTP (le istruzioni potranno essere trovate nel manuale collegato qui sotto). Per le successive poche opzioni potrete scegliere “No” a meno che prevedete di utilizzare la macchina virtuale come un server, allora dovrete selezionare i servizi che vorrete. Alla schermata dove vi verrà chiesto se volete aggiungere un utente, selezionate “yes” (fig. 10). Per primo dovrete creare un gruppo per i vostri utenti (potrete uscire anche usando solo “user” come gruppo, ma si preferisce avere il nome dell'utente come gruppo principale). Quando l'avrete fatto, dovrebbe essere qualcosa come in fig. 11. Una volta che il gruppo è stato creato, potrete creare un utente (fig. 12) usando il vostro username, il gruppo verrà creato nella finetra “group”; scegliere una password, dare il vostro nome e aggiungere “users” ai membri del gruppo. Potrete anche se vorrete aggiungere i vostri utenti al gruppo “wheel” se vorrete installare sudo. |
= Revisione = |
Linea 59: | Linea 80: |
Ha imparato tutto quello che sa interrompendo ripetutamente il suo sistema, non avendo nessuna opzione ma scoprendo come risolverla. Potrete scrivere un email a Lucas a: lswest34@gmail.com. Una volta che avrete completato questo passo potrete scegliere se volete installare qualsiasi altro pacchetto extra, e potrete anche chiedere per una password per il vostro account radice. Passo 6: Controllare il manuale per le istruzioni sui pacchetti installati, e tenersi impegnati sull'argomento! Mi auguro abbiate trovato questo articolo utile e che abbiate avuto interesse in FreeBSD. Se sarete come me, come potrete capire sarete intriganti e curiosi. Se avrete qualsiasi domanda, problemi o suggerimenti potrete inviarmi un email a 'lswest34@gmail.com'. Per favore mettete “virtualization” o “FCM” nella linea oggetto così che io non trascuri le email. Extra links: PC-BSD (Una distribuzione FreeBSD-based con un installer grafico e un ambiente desktop pre-configurato). http://www.pcbsd.org/FreeBSD Manuale: http://www.freebsd.org/doc/en_US.ISO8859-1/books/handbook/index.html |
== Note alla revisione == |
Linea 77: | Linea 83: |
= Errata Corrige = | |
Linea 78: | Linea 85: |
==== Note alla traduzione ==== === Revisione === HOW-TO Scritto da Lucas Westermann ==== Note alla revisione ==== === Errata Corrige === |
Testo inglese
LibreOffice Part 23: Base Form Enhancements with Macros
by Elmer Perry
For the previous four parts of this series, we have slowly built a database document using LibreOffice's Base module. We have a database with forms to enter our data, and queries and reports for extracting the data. We now have a usable document for recording our book library. However, our current design has one flaw we need to overcome. If we need to enter a new author or media type while we are in the books form, we have to close the book form and open one of the others. If we could enter new authors and media types directly from the books form, it would behave more like an application and make data entry even easier. We can accomplish this through a few short macros. The LibreOffice Basic language is very similar to other Basic languages, such as Visual Basic for Applications. To manipulate the underlying LibreOffice document, we access the Uno framework controlling the document. The Uno framework is quite complex, but I will explain, as best I can, the properties and objects we will use. The goal is not to teach you how to write LibreOffice macros, but how you can use them. Macro Security and Options
While macros allow us to do cool things in our documents, they can also cause problems. Some people use macros to compromise other people's systems, therefore, we need to take a few minutes to talk about macro security. Whether you are running LibreOffice on Linux, Mac, or Windows, malicious code in a macro can compromise your data and possibly your entire system.
Macro security in LibreOffice is simple. Tools > Options opens the Options dialog for LibreOffice. Under LibreOffice, select Security. Click on the Macro Security button to pop up the macro security options. You have four options. Never use the Low security option – it will run macros without asking you. I recommend the Medium security level. With this level, you are prompted whether to run the macros when you open a document containing macros. The High and Very High options require a certificate or folder you designate as trusted. While this is great, I believe nothing trumps the instincts of the user. You usually know whether you were expecting a document to contain macros. When in doubt, click No. Click OK to save your choice and OK to close the options dialog. Now, on to the fun stuff. The Macros
We will write four macros for our database document. Three will deal with opening forms, and the last will update the list boxes for authors and media types. The general idea behind macros is to accomplish tasks that are not built into the program, or to simplify complex tasks. Our macros really accomplish both, as we will simplify the tasks of adding authors and media types and provide functionality not built into the program. Before we can begin to write our macros, we need a container to hold them. Macros are contained in a module. Modules can live in the program itself or within a document. Since our macros are specific to our database file, we will embed them in the document. Macros embedded in a document are available only when the document is loaded. Macros contained in the program are available as long as the program is running. Tools > Macros > Organize Macros > LibreOffice Basic. The LibreOffice Basic Macros dialog pops up. Select book.odb from the Macro from-list. Click the New button. A dialog pops up asking you for a name for the module. Name it FormCalls. Click OK. This brings up the LibreOffice macro editor. The macro comes with a default main subroutine. We will not use this subroutine. Highlight Sub main and End Sub and press the backspace key to delete them. Our first macro is a generalized subroutine for opening a form. A generalized subroutine is written for reuse. We will call this routine twice from other routines we write. Type this subroutine into the editor:
Sub OpenAForm (FormName as String) Dim GetForm as Object GetForm = ThisDatabaseDocument.FormDocuments.GetByName(FormName) GetForm.Open End Sub
The first line of the subroutine is called the signature. The signature determines how the subroutine is called. A signature starts with the keyword Sub, which defines this call as a subroutine. Next, the name of the subroutine. In our case, OpenAForm is the name of the subroutine. Finally in the parenthesis, we have the arguments used when calling this subroutine. In our case, we have a variable named FormName which is a type String. In the second line of the subroutine, Dim is another keyword. Dim initializes a variable as a type, and, optionally, a value. We define a variable named GetForm as a type Object. The third line assigns a value to the variable GetForm through a chain of commands in the Uno framework. ThisDatabaseDocument refers to the currently open database document. In our case, book.odb. FormDocuments is a collection of all the forms in the document. Finally, GetByName retrieves a specific form object from the collection. Notice, we pass the variable FormName from the signature to this method. Once the call is complete, the variable GetForm is the object of the form name passed to the subroutine. The fourth line calls the Open method of the form. On the fifth line, we tell Basic this is the end of the subroutine with the command End Sub. We will call the OpenAform subroutine twice. Once to open the authors form, and once to open the media form. Add these two subroutines to your editor:
Sub OpenAuthorsForm(oEv As Object) OpenAForm("Authors") End Sub Sub OpenMediaForm(oEv As Object) OpenAForm("Media") End Sub
The signature on these two subroutines are a little different. Since we will call them from a control within a form, we need to pass the object making the call as an argument, even though we do not use it. The argument oEv is a reference to the object making the call. We will use this to our advantage later, in the last subroutine, but here we do it because it is required. These two subroutines are pretty simple. We just make a call to OpenAForm passing the name of the form we want to open, Authors or Media. The final subroutine deals with our problem of refreshing the data in the list boxes for authors and media when we add authors or media using the two subroutines above:
Sub ListRefresh(oEv as Object) oEv.source.model.Refresh End Sub
Once again, since we will call this subroutine from a control, we need a reference to the control making the call. However, this time we will actually use the object. This subroutine makes a method call to the underlying model of the list box and refreshes the data in the list, thus updating our list of authors or media types. Save your module and close the Basic editor.
Making Connections to Macros
At this point, our macros do nothing. We need to connect them to objects in our form to activate them when needed. First, we will connect the open form subroutines to buttons in our form, and then we will connect the ListRefresh to the list boxes. In the database pane, click on Forms. Right-click the Books form and select edit. Add two push buttons to the form, one under the Authors table and another under the Media table. Right-click the button under the Authors table and select Control to bring up the buttons properties dialog. On the General tab, change the name to AddAuthors and the Label to Add Authors. On the Events tab, click the ellipses (…) button next to Execute Action – which brings up the Assign Action dialog. Click the Macro button to bring up the Macro Selector dialog. In the tree list under Library, select book.odb > Standard > FormCalls. Select OpenAuthorsForm from the Macro Name list and click OK. Click OK to close the Assign Action dialog. Close the buttons properties dialog. Do the same with the button under the Media table, only name it AddMedia, make the label Add Media Type, and assign the macro OpenMediaForm to the Execute Action event. Finally, we need to add the refresh subroutine to our list boxes. Right-click the Authors column in the authors table and select Column. On the Events tab, click the ellipse (…) button beside “When receiving focus”. In the Assign Action button, use the Macro button to assign the ListRefresh macro to the action. This will cause the list to update data from the Authors table when you click on a list box in the column. Do the same for the Media column in the media table. Save your changes to the Books form and close it.
Testing Your Changes
Any time we make changes to our forms, we will want to test them and make sure we got everything right, especially in cases where we have used macros. One simple typo could cause things to not work. Double-click the Books form to open it. Add a new book with an author and media type you have not added already. Click the Add Authors button to make sure it opens the form. Add some authors. Close the Authors form. Click on the authors dropdown list box and verify that the authors you added are there. Do the same test with the Add Media Type button and listbox. Final Thoughts and References
Again, I would like to emphasize that writing macros in LibreOffice Basic is complex. Documentation is pretty sparse, but it is out there. If you are interested in taking up the challenge, here are some references to get you started: LibreOffice Basic Guide: http://wiki.documentfoundation.org/images/d/dd/BasicGuide_OOo3.2.0.odt Andrew Pitonyak's OpenOffice Macro Information: http://www.pitonyak.org/oo.php You can find the macros used in this How-To on pastebin.com at http://pastebin.com/MU2Ztizi Next time, we will move on to another part of the LibreOffice suite and explore the Math module.
Traduzione italiana
Note alla traduzione
Revisione
Note alla revisione