Wiki Ubuntu-it

Indice
Partecipa
FAQ
Wiki Blog
------------------
Ubuntu-it.org
Forum
Chiedi
Chat
Cerca
Planet
  • Pagina non alterabile
  • Informazioni
  • Allegati
  • Differenze per "Fcm/Edizione/GruppoC5"
Differenze tra le versioni 26 e 84 (in 58 versioni)
Versione 26 del 15/06/2011 21.14.47
Dimensione: 5549
Commento:
Versione 84 del 10/02/2013 19.20.27
Dimensione: 10230
Autore: mapreri
Commento: ready for #70
Le cancellazioni sono segnalate in questo modo. Le aggiunte sono segnalate in questo modo.
Linea 1: Linea 1:
#acl GruppoAdmin:admin,read,write,revert GruppoEditori:read,write,revert GruppoFcm:read,write,revert -All:read -Known:read #acl GruppoAdmin:admin,read,write,revert GruppoOperatori:admin,read,write,revert GruppoEditori:read,write,revert GruppoFcm:read,write,revert palombo:admin,read,write,revert new.life:admin,read,write,revert paolettopn:admin,read,write,revert Known:read All:read
Linea 3: Linea 4:
= Testo inglese =
Linea 4: Linea 6:
== HowTo6 == LibreOffice Part 23: Base Form Enhancements with Macros
Linea 6: Linea 8:
=== Traduzione italiana ===
HOW-TO
Scritto da Lucas Westermann
by Elmer Perry
Linea 10: Linea 10:
Questo mese ho intenzione di fare un passo ulteriore nel regno dei sistemi ed installare la nostra prima 'CLI' installer basato su sistema Unix.
Installeremo FreeBSD
8.1 che potrete scaricare da
http://www.freebsd.org/where.htm
l. Cliccando sul link “[iso]” vi collegherete ad un server FTP, dove saranno presentate alcune opzioni per le immagini. Potrete scaricare l'uno o l'altro, il DVD oppure i file "-discl.iso".
L'immagine livefs è destinata per il recovery e la riparazione, non per l'installazione.
Per maggiori informazioni sulle differenti opzioni dare un'occhiata qui:
http://www.freebsd.org/releases/8.1R/announce.html.
Scegliere una macchina con 512MB di RAM e 6GB di Hard Disk, ma sarete liberi di cambiare (aumentare o mantenere come sopra i minimi requisiti).
Passo 1:
Una volta avviata la macchina e selezionato il corretto file ISO, verrete salutati da FreeBSD
For the previous four parts of this series, we have slowly built a database document using LibreOffice's Base module. We have a database with forms to enter our data, and queries and reports for extracting the data. We now have a usable document for recording our book library. However, our current design has one flaw we need to overcome. If we need to enter a new author or media type while we are in the books form, we have to close the book form and open one of the others. If we could enter new authors and media types directly from the books form, it would behave more like an application and make data entry even easier. We can accomplish this through a few short macros.
The LibreOffice Basic language is very similar to other Basic languages, such as Visual Basic for Applications. To manipulate the underlying LibreOffice document, we access the Uno framework controlling the document. The Uno framework is quite complex, but I will explain, as best I can, the properties and objects we will use. The goal is not to teach you how to write LibreOffice macros, but how you can use them.
Macro Security and Options
Linea 22: Linea 14:
bootloader. Potrete lasciare scorrere il tempo o digitare 1 per fare il boot dal CD. While macros allow us to do cool things in our documents, they can also cause problems. Some people use macros to compromise other people's systems, therefore, we need to take a few minutes to talk about macro security. Whether you are running LibreOffice on Linux, Mac, or Windows, malicious code in a macro can compromise your data and possibly your entire system.
Linea 24: Linea 16:
Passo 2:
Una volta che il CD sarà stato caricato, verrà chiesta una regione (fig. 1) e una cartina (fig. 2).
Macro security in LibreOffice is simple. Tools > Options opens the Options dialog for LibreOffice. Under LibreOffice, select Security. Click on the Macro Security button to pop up the macro security options. You have four options. Never use the Low security option – it will run macros without asking you. I recommend the Medium security level. With this level, you are prompted whether to run the macros when you open a document containing macros. The High and Very High options require a certificate or folder you designate as trusted. While this is great, I believe nothing trumps the instincts of the user. You usually know whether you were expecting a document to contain macros. When in doubt, click No. Click OK to save your choice and OK to close the options dialog.
Now, on to the fun stuff.
The Macros
Linea 27: Linea 20:
Passo 3:
Ora sarete nel menù principale (fig. 3). Se questa è la prima volta che installate FreeBSD, raccomandiamo di andare nelle opzioni Standard, ma sarete liberi di scegliere anche altro (è dopotutto un sistema virtuale che può essere reinstallato numerose volte).
We will write four macros for our database document. Three will deal with opening forms, and the last will update the list boxes for authors and media types. The general idea behind macros is to accomplish tasks that are not built into the program, or to simplify complex tasks. Our macros really accomplish both, as we will simplify the tasks of adding authors and media types and provide functionality not built into the program.
Before we can begin to write our macros, we need a container to hold them. Macros are contained in a module. Modules can live in the program itself or within a document. Since our macros are specific to our database file, we will embed them in the document. Macros embedded in a document are available only when the document is loaded. Macros contained in the program are available as long as the program is running.
Tools > Macros > Organize Macros > LibreOffice Basic. The LibreOffice Basic Macros dialog pops up. Select book.odb from the Macro from-list. Click the New button. A dialog pops up asking you for a name for the module. Name it FormCalls. Click OK. This brings up the LibreOffice macro editor. The macro comes with a default main subroutine. We will not use this subroutine. Highlight Sub main and End Sub and press the backspace key to delete them.
Our first macro is a generalized subroutine for opening a form. A generalized subroutine is written for reuse. We will call this routine twice from other routines we write. Type this subroutine into the editor:
{{{
Sub OpenAForm (FormName as String)
 Dim GetForm as Object
 GetForm = ThisDatabaseDocument.FormDocuments.GetByName(FormName)
 GetForm.Open
End Sub
}}}
The first line of the subroutine is called the signature. The signature determines how the subroutine is called. A signature starts with the keyword Sub, which defines this call as a subroutine. Next, the name of the subroutine. In our case, OpenAForm is the name of the subroutine. Finally in the parenthesis, we have the arguments used when calling this subroutine. In our case, we have a variable named FormName which is a type String. In the second line of the subroutine, Dim is another keyword. Dim initializes a variable as a type, and, optionally, a value. We define a variable named GetForm as a type Object. The third line assigns a value to the variable GetForm through a chain of commands in the Uno framework. ThisDatabaseDocument refers to the currently open database document. In our case, book.odb. FormDocuments is a collection of all the forms in the document. Finally, GetByName retrieves a specific form object from the collection. Notice, we pass the variable FormName from the signature to this method. Once the call is complete, the variable GetForm is the object of the form name passed to the subroutine. The fourth line calls the Open method of the form. On the fifth line, we tell Basic this is the end of the subroutine with the command End Sub.
We will call the OpenAform subroutine twice. Once to open the authors form, and once to open the media form. Add these two subroutines to your editor:
{{{
Sub OpenAuthorsForm(oEv As Object)
 OpenAForm("Authors")
End Sub
Linea 30: Linea 38:
Passo 4:
Una volta scelto di installare la versione Standard, apparirà un messaggio che spiegherà fdisk (fig. 4). Dato che questa è una macchina virtuale e non c'è nient'altro, va bene usare il comando “(A)ll”. Se volete installarlo sulla macchina attuale, suggeriamo di eseguire i passaggi in ordine per abituarsi.
Il menù fdisk come si vede in fig. 5 è grazioso ed autoesplicativo
- una volta che capirete le nozioni di base di fdisk.
Sub OpenMediaForm(oEv As Object)
 OpenAForm("Media")
End Sub
}}}
The signature on these two subroutines are a little different. Since we will call them from a control within a form, we need to pass the object making the call as an argument, even though we do not use it. The argument oEv is a reference to the object making the call. We will use this to our advantage later, in the last subroutine, but here we do it because it is required. These two subroutines are pretty simple. We just make a call to OpenAForm passing the name of the form we want to open, Authors or Media.
The final subroutine deals with our problem of refreshing the data in the list boxes for authors and media when we add authors or media using the two subroutines above:
{{{
Sub ListRefresh(oEv as Object)
 oEv.source.model.Refresh
End Sub
}}}
Once again, since we will call this subroutine from a control, we need a reference to the control making the call. However, this time we will actually use the object. This subroutine makes a method call to the underlying model of the list box and refreshes the data in the list, thus updating our list of authors or media types.
Save your module and close the Basic editor.

Making Connections to Macros

At this point, our macros do nothing. We need to connect them to objects in our form to activate them when needed. First, we will connect the open form subroutines to buttons in our form, and then we will connect the ListRefresh to the list boxes.
In the database pane, click on Forms. Right-click the Books form and select edit. Add two push buttons to the form, one under the Authors table and another under the Media table. Right-click the button under the Authors table and select Control to bring up the buttons properties dialog. On the General tab, change the name to AddAuthors and the Label to Add Authors. On the Events tab, click the ellipses (…) button next to Execute Action – which brings up the Assign Action dialog. Click the Macro button to bring up the Macro Selector dialog. In the tree list under Library, select book.odb > Standard > FormCalls. Select OpenAuthorsForm from the Macro Name list and click OK. Click OK to close the Assign Action dialog. Close the buttons properties dialog.
Do the same with the button under the Media table, only name it AddMedia, make the label Add Media Type, and assign the macro OpenMediaForm to the Execute Action event.
Finally, we need to add the refresh subroutine to our list boxes. Right-click the Authors column in the authors table and select Column. On the Events tab, click the ellipse (…) button beside “When receiving focus”. In the Assign Action button, use the Macro button to assign the ListRefresh macro to the action. This will cause the list to update data from the Authors table when you click on a list box in the column.
Do the same for the Media column in the media table.
Save your changes to the Books form and close it.

Testing Your Changes

Any time we make changes to our forms, we will want to test them and make sure we got everything right, especially in cases where we have used macros. One simple typo could cause things to not work. Double-click the Books form to open it. Add a new book with an author and media type you have not added already. Click the Add Authors button to make sure it opens the form. Add some authors. Close the Authors form. Click on the authors dropdown list box and verify that the authors you added are there. Do the same test with the Add Media Type button and listbox.
Final Thoughts and References

Again, I would like to emphasize that writing macros in LibreOffice Basic is complex. Documentation is pretty sparse, but it is out there. If you are interested in taking up the challenge, here are some references to get you started:
LibreOffice Basic Guide: http://wiki.documentfoundation.org/images/d/dd/BasicGuide_OOo3.2.0.odt
Andrew Pitonyak's OpenOffice Macro Information: http://www.pitonyak.org/oo.php
You can find the macros used in this How-To on pastebin.com at http://pastebin.com/MU2Ztizi
Next time, we will move on to another part of the LibreOffice suite and explore the Math module.

= Traduzione italiana =

== Note alla traduzione ==
Linea 36: Linea 77:
VIRTUALIZATION - PART 4
Once you've completed that
task, you need to decide what
bootmanager you want to install. If
FreeBSD is on its own, Standard is
suitable, and if you have multiple
installs on a disk, you'll need to
choose “BootMgr” or “None” (if you
already installed a boot manager of
some sort). See fig. 6.
Thereafter you just need to
create a set of BSD partitions
within the fdisk partition you
created. Basically, you're splitting
up the partition into regions for the
BSD system, and Auto is suitable
for pretty much every case I can
think of, unless you feel you need
an extra segment/don't need a
segment. Again, trying it out in a
virtual machine is better than
messing around on a live system.
Step 5:
Now you can choose what
packages to install (fig. 7). I
generally choose Custom, and
select Base, kernels, dict, doc,
docuser, games, man, catman, and
ports (see fig. 8).
Once you choose the packages
to install, you need to select where
to install it from (fig. 9). The CD is
fine if you are using the disc1 or
dvd1 ISOs, and you'll need to use
the FTP option for the bootonly
image. Also, if you want to have the
most up-to-date packages, you can
use the FTP option as well. If you
choose the FTP option, you'll need
to enable networking and select an
FTP site (instructions for which can
be found in the handbook I link to
below). For the next few options,
you can choose “No” unless you
know for a fact you'll be using the
virtual machine as a server, then
you'll need to pick the services you
want. At the screen where you're
asked if you want to add a user, you
should select “yes” (fig. 10). First
you need to create a group for your
user (you can also get away with
just using “user” as a group, but I
prefer to have the primary group
be the user's name).When you're
done, it should look something like
fig. 11. Once the group is created,
you can create a user (fig. 12) using
your username, the group you just
created in the “group” box; choose
a password, give it your name, and
add “users” to the member groups.
You may also want to add your user
to the group “wheel” if you want to
install sudo.
= Revisione =
Linea 103: Linea 80:
has learned all he knows from
repeatedly breaking his system, then
having no other option but to
discover how to fix it. You can email
Lucas at: lswest34@gmail.com.
Once you've completed this
step, you can choose if you want to
install any extra packages, and you
will also be asked for a password for
your root account.
Step 6:
Check the handbook for
instructions on installing packages,
and get busy messing around!
I hope you've found this article
useful, and that you've gotten
interested in FreeBSD. If you're
anything like me, you'll be intrigued
and curious as to what you can
figure out. If you have any
questions, problems, or
suggestions, you can email me at
lswest34@gmail.com. Please put
“virtualization” or “FCM” in the
subject line, so that I don't overlook
the email.
Extra links:
PC-BSD (A FreeBSD-based
distribution with a graphical
installer and pre-configured
desktop environment).
http://www.pcbsd.org/
FreeBSD Handbook:
http://www.freebsd.org/doc/en_US
.ISO8859-
1/books/handbook/index.html
== Note alla revisione ==
Linea 141: Linea 83:
= Errata Corrige =
Linea 142: Linea 85:
==== Note alla traduzione ====


=== Revisione ===
HOW-TO
Scritto da Lucas Westermann


==== Note alla revisione ====



=== Errata Corrige ===

Testo inglese

LibreOffice Part 23: Base Form Enhancements with Macros

by Elmer Perry

For the previous four parts of this series, we have slowly built a database document using LibreOffice's Base module. We have a database with forms to enter our data, and queries and reports for extracting the data. We now have a usable document for recording our book library. However, our current design has one flaw we need to overcome. If we need to enter a new author or media type while we are in the books form, we have to close the book form and open one of the others. If we could enter new authors and media types directly from the books form, it would behave more like an application and make data entry even easier. We can accomplish this through a few short macros. The LibreOffice Basic language is very similar to other Basic languages, such as Visual Basic for Applications. To manipulate the underlying LibreOffice document, we access the Uno framework controlling the document. The Uno framework is quite complex, but I will explain, as best I can, the properties and objects we will use. The goal is not to teach you how to write LibreOffice macros, but how you can use them. Macro Security and Options

While macros allow us to do cool things in our documents, they can also cause problems. Some people use macros to compromise other people's systems, therefore, we need to take a few minutes to talk about macro security. Whether you are running LibreOffice on Linux, Mac, or Windows, malicious code in a macro can compromise your data and possibly your entire system.

Macro security in LibreOffice is simple. Tools > Options opens the Options dialog for LibreOffice. Under LibreOffice, select Security. Click on the Macro Security button to pop up the macro security options. You have four options. Never use the Low security option – it will run macros without asking you. I recommend the Medium security level. With this level, you are prompted whether to run the macros when you open a document containing macros. The High and Very High options require a certificate or folder you designate as trusted. While this is great, I believe nothing trumps the instincts of the user. You usually know whether you were expecting a document to contain macros. When in doubt, click No. Click OK to save your choice and OK to close the options dialog. Now, on to the fun stuff. The Macros

We will write four macros for our database document. Three will deal with opening forms, and the last will update the list boxes for authors and media types. The general idea behind macros is to accomplish tasks that are not built into the program, or to simplify complex tasks. Our macros really accomplish both, as we will simplify the tasks of adding authors and media types and provide functionality not built into the program. Before we can begin to write our macros, we need a container to hold them. Macros are contained in a module. Modules can live in the program itself or within a document. Since our macros are specific to our database file, we will embed them in the document. Macros embedded in a document are available only when the document is loaded. Macros contained in the program are available as long as the program is running. Tools > Macros > Organize Macros > LibreOffice Basic. The LibreOffice Basic Macros dialog pops up. Select book.odb from the Macro from-list. Click the New button. A dialog pops up asking you for a name for the module. Name it FormCalls. Click OK. This brings up the LibreOffice macro editor. The macro comes with a default main subroutine. We will not use this subroutine. Highlight Sub main and End Sub and press the backspace key to delete them. Our first macro is a generalized subroutine for opening a form. A generalized subroutine is written for reuse. We will call this routine twice from other routines we write. Type this subroutine into the editor:

Sub OpenAForm (FormName as String)
        Dim GetForm as Object
        GetForm = ThisDatabaseDocument.FormDocuments.GetByName(FormName)
        GetForm.Open
End Sub

The first line of the subroutine is called the signature. The signature determines how the subroutine is called. A signature starts with the keyword Sub, which defines this call as a subroutine. Next, the name of the subroutine. In our case, OpenAForm is the name of the subroutine. Finally in the parenthesis, we have the arguments used when calling this subroutine. In our case, we have a variable named FormName which is a type String. In the second line of the subroutine, Dim is another keyword. Dim initializes a variable as a type, and, optionally, a value. We define a variable named GetForm as a type Object. The third line assigns a value to the variable GetForm through a chain of commands in the Uno framework. ThisDatabaseDocument refers to the currently open database document. In our case, book.odb. FormDocuments is a collection of all the forms in the document. Finally, GetByName retrieves a specific form object from the collection. Notice, we pass the variable FormName from the signature to this method. Once the call is complete, the variable GetForm is the object of the form name passed to the subroutine. The fourth line calls the Open method of the form. On the fifth line, we tell Basic this is the end of the subroutine with the command End Sub. We will call the OpenAform subroutine twice. Once to open the authors form, and once to open the media form. Add these two subroutines to your editor:

Sub OpenAuthorsForm(oEv As Object)
        OpenAForm("Authors")
End Sub

Sub OpenMediaForm(oEv As Object)
        OpenAForm("Media")
End Sub

The signature on these two subroutines are a little different. Since we will call them from a control within a form, we need to pass the object making the call as an argument, even though we do not use it. The argument oEv is a reference to the object making the call. We will use this to our advantage later, in the last subroutine, but here we do it because it is required. These two subroutines are pretty simple. We just make a call to OpenAForm passing the name of the form we want to open, Authors or Media. The final subroutine deals with our problem of refreshing the data in the list boxes for authors and media when we add authors or media using the two subroutines above:

Sub ListRefresh(oEv as Object)
        oEv.source.model.Refresh
End Sub

Once again, since we will call this subroutine from a control, we need a reference to the control making the call. However, this time we will actually use the object. This subroutine makes a method call to the underlying model of the list box and refreshes the data in the list, thus updating our list of authors or media types. Save your module and close the Basic editor.

Making Connections to Macros

At this point, our macros do nothing. We need to connect them to objects in our form to activate them when needed. First, we will connect the open form subroutines to buttons in our form, and then we will connect the ListRefresh to the list boxes. In the database pane, click on Forms. Right-click the Books form and select edit. Add two push buttons to the form, one under the Authors table and another under the Media table. Right-click the button under the Authors table and select Control to bring up the buttons properties dialog. On the General tab, change the name to AddAuthors and the Label to Add Authors. On the Events tab, click the ellipses (…) button next to Execute Action – which brings up the Assign Action dialog. Click the Macro button to bring up the Macro Selector dialog. In the tree list under Library, select book.odb > Standard > FormCalls. Select OpenAuthorsForm from the Macro Name list and click OK. Click OK to close the Assign Action dialog. Close the buttons properties dialog. Do the same with the button under the Media table, only name it AddMedia, make the label Add Media Type, and assign the macro OpenMediaForm to the Execute Action event. Finally, we need to add the refresh subroutine to our list boxes. Right-click the Authors column in the authors table and select Column. On the Events tab, click the ellipse (…) button beside “When receiving focus”. In the Assign Action button, use the Macro button to assign the ListRefresh macro to the action. This will cause the list to update data from the Authors table when you click on a list box in the column. Do the same for the Media column in the media table. Save your changes to the Books form and close it.

Testing Your Changes

Any time we make changes to our forms, we will want to test them and make sure we got everything right, especially in cases where we have used macros. One simple typo could cause things to not work. Double-click the Books form to open it. Add a new book with an author and media type you have not added already. Click the Add Authors button to make sure it opens the form. Add some authors. Close the Authors form. Click on the authors dropdown list box and verify that the authors you added are there. Do the same test with the Add Media Type button and listbox. Final Thoughts and References

Again, I would like to emphasize that writing macros in LibreOffice Basic is complex. Documentation is pretty sparse, but it is out there. If you are interested in taking up the challenge, here are some references to get you started: LibreOffice Basic Guide: http://wiki.documentfoundation.org/images/d/dd/BasicGuide_OOo3.2.0.odt Andrew Pitonyak's OpenOffice Macro Information: http://www.pitonyak.org/oo.php You can find the macros used in this How-To on pastebin.com at http://pastebin.com/MU2Ztizi Next time, we will move on to another part of the LibreOffice suite and explore the Math module.

Traduzione italiana

Note alla traduzione

Revisione

Note alla revisione

Errata Corrige


CategoryComunitaFcm