Wiki Ubuntu-it

Indice
Partecipa
FAQ
Wiki Blog
------------------
Ubuntu-it.org
Forum
Chiedi
Chat
Cerca
Planet
  • Pagina non alterabile
  • Informazioni
  • Allegati


Introduzione

In questa guida sono contenute delle istruzioni utili per l'installazione della stampante multifunzione Epson SX400.

Installazione

Stampante

A partire da Karmic il driver della stampante è riconosciuto automaticamente mentre per le versioni precedenti è possibile utilizzare il driver della EPSON Stylus DX4800.

Scanner

Per poter utilizzare lo scanner è necessario installare il pacchetto libsane-extras presente nel componente universe dei repository ufficiali.

Configurazione

Aprire il file /etc/sane.d/epson2.conf con un editor di testo e i privilegi d'amministrazione e aggiungere la riga seguente:

usb 0x04b8 0x084a

Digitare il seguente comando in una finestra di terminale:

sudo sane-find-scanner

Il risultato sarà simile al seguente:

# sane-find-scanner will now attempt to detect your scanner. If the
  # result is different from what you expected, first make sure your
  # scanner is powered up and properly connected to your computer.

  # No SCSI scanners found. If you expected something different, make sure that
  # you have loaded a kernel SCSI driver for your SCSI adapter.

found USB scanner (vendor=0x04b8 [EPSON], product=0x084a [USB MFP]) at libusb:001:005
  # Your USB scanner was (probably) detected. It may or may not be supported by
  # SANE. Try scanimage -L and read the backend's manpage.

  # Not checking for parallel port scanners.

  # Most Scanners connected to the parallel port or other proprietary ports
  # can't be detected by this program.

Aprire il file /etc/udev/rules.d/scanner.rules con un editor di testo e i privilegi d'amministrazione e aggiungere la seguente riga:

# EPSON Stylus SX400 | EPSON Stylus SX400
SUBSYSTEMS=="usb"
SYSFS{idVendor}=="04b8", SYSFS{idProduct}=="084a", MODE="0666", GROUP="scanner", ENV{libsane_matched}="yes"

Salvare il file e chiudere l'editor di testo e infine digitare il seguente comando in una finestra di terminale:

sudo addgroup $USER scanner

Se state utilizzando un utente diverso da quello con cui utilizzerete lo scanner sostituire la dicitura «$USER» con il nome utente che si desidera aggiungere al gruppo. Per applicare le modifiche è necessario riavviare la sessione corrente.


CategoryHomepage