Differenze per "Hardware/Video/Intel/Poulsbo"

Differenze tra le versioni 1 e 3 (in 2 versioni)

Poulsbo (GMA500) Support in Karmic (9.10)

Scaricare il pacchetto psb-kernel-* da http://swiss.ubuntuforums.org/showpost.php?p=7773647&postcount=13

Aggiungere i repository digitando in un terminale i seguenti comandi:

sudo echo 'deb http://ppa.launchpad.net/ubuntu-mobile/ppa/ubuntu jaunty main' >> /etc/apt/sources.list.d/ubuntu-mobile.list

sudo echo 'deb-src http://ppa.launchpad.net/ubuntu-mobile/ppa/ubuntu jaunty main' >> /etc/apt/sources.list.d/ubuntu-mobile.list

sudo echo 'deb http://ppa.launchpad.net/albertomilone/poulsbo-graphics/ubuntu jaunty main ' >> /etc/apt/sources.list.d/poulsbo-graphics-alberto-milone.list

sudo echo 'deb-src http://ppa.launchpad.net/albertomilone/poulsbo-graphics/ubuntu jaunty main' >> /etc/apt/sources.list.d/poulsbo-graphics-alberto-milone.list

Aggiungere le chiavi

sudo apt-key adv --keyserver keyserver.ubuntu.com --recv-keys C6598A30

sudo apt-key adv --keyserver keyserver.ubuntu.com --recv-keys 99C0198F

sudo apt-get update

sudo apt-get install  dkms fakeroot

sudo apt-get install libdrm-poulsbo1

sudo apt-get install poulsbo-driver-2d poulsbo-driver-3d psb-firmware

Installare i pacchetti psb-kernel-*

sudo dpkg -i psb-kernel-*

sudo echo "blacklist i915" >> /etc/modprobe.d/blacklist.conf

sudo update-initramfs -u

Con un editor di testo ed i privilegi amministrativi creare il file /etc/X11/xorg.conf ed incollare in questo le seguenti righe:

Section "Device"
        Identifier      "GMA500"
        Option "AccelMethod" "EXA"
        Option "DRI" "on"
        Option "MigrationHeuristic" "greedy"
        Option "IgnoreACPI" "yes"
        Driver "psb"
EndSection

Section "DRI"
    Mode    0666
EndSection

with following content and whitelist psb in /usr/bin/compiz by adding "psb" to the WHITELIST line. Kernel parameters (in grub).

If you have a Vaio-P or if you are experiencing extremely slow performance (less than 14 fps running "/usr/bin/xscreensaver/glblur -fps -window") add "mem=2000mb" to /etc/default/grub, at the end of GRUB_CMDLINE_LINUX_DEFAULT, if using grub2, or at the end of the "# defoptions=" line in /boot/grub/menu.lst. For both grub versions run update-grub after editing those files. This reserves memory for the video driver and should improve your 3D performance.

Attention: For machines with only 1GB ram, the entry should be "mem=980mb"

Supporto Poulsbo (GMA500) in Intrepid (8.10) e Jaunty (9.04)

I driver per il chipset Poulsbo contenuti in the ubuntu-mobile PPA.

Aggiungere il ubuntu-mobile PPA

Edit a file called /etc/apt/sources.list/psb.list, and add the following line to it: deb http://ppa.launchpad.net/ubuntu-mobile/ppa/ubuntu YOUR RELEASE HERE main
You may also wish to add the key to the keyring by following the instructions here.

Which kernel are you running?

Se si posssiede un kernel che si è compilati da soli, oppure non si stà utilizzando l'ultimo kernel fornito per Intrepid o Jaunty, installare il pacchetto psb-kernel-source (e assicurarsi che gli header per il kernel siano disponibili) e rimuovere allora il pacchetto psb-modules.

Install packages

Installare poulsbo-driver-2d se si richiede solo il 2D, e poulsbo-driver-3d si desidera l'accelerazione 3D. Assicurarsi che l'utente sia membro del gruppo video prima di usare il 3D.
sudo adduser $USER video

Problemi comuni

Il server grafico X non si avvia

Assicurarsi che il modulo del kernel psb sia stato caricato, digitando in un terminale:
sudo modprobe psb

-  ⇤ ← Versione 1 del 19/11/2009 22.47.32 → 
  Dimensione: 3761
  Autore: LucaGambardella
  Commento:
+   ← Versione 3 del 19/11/2009 23.29.10 → ⇥
  Dimensione: 3783
  Autore: LucaGambardella
  Commento:
-Le cancellazioni sono segnalate in questo modo.
+Le aggiunte sono segnalate in questo modo.
 Linea 3:
-Start by downloading lucazade's psb-kernel-* packages from http://swiss.ubuntuforums.org/showpost.php?p=7773647&postcount=13
+. Scaricare il pacchetto `psb-kernel-*` da http://swiss.ubuntuforums.org/showpost.php?p=7773647&postcount=13
 Linea 5:
-Following code samples are stripped from my install-poulsbo.sh, almost every command listed here requires sudo appended in front.
-Linea 7:
+Linea 6:
-'''Adding required PPAs'''
{{{
echo 'deb http://ppa.launchpad.net/ubuntu-mobile/ppa/ubuntu jaunty main' >> /etc/apt/sources.list.d/ubuntu-mobile.list
-Linea 11:
+Linea 7:
-echo 'deb-src http://ppa.launchpad.net/ubuntu-mobile/ppa/ubuntu jaunty main' >> /etc/apt/sources.list.d/ubuntu-mobile.list
+. Aggiungere i repository digitando in un terminale i seguenti comandi:{{{
sudo echo 'deb http://ppa.launchpad.net/ubuntu-mobile/ppa/ubuntu jaunty main' >> /etc/apt/sources.list.d/ubuntu-mobile.list
-Linea 13:
+Linea 10:
-echo 'deb http://ppa.launchpad.net/albertomilone/poulsbo-graphics/ubuntu jaunty main ' >> /etc/apt/sources.list.d/poulsbo-graphics-alberto-milone.list
+sudo echo 'deb-src http://ppa.launchpad.net/ubuntu-mobile/ppa/ubuntu jaunty main' >> /etc/apt/sources.list.d/ubuntu-mobile.list
-Linea 15:
+Linea 12:
-echo 'deb-src http://ppa.launchpad.net/albertomilone/poulsbo-graphics/ubuntu jaunty main' >> /etc/apt/sources.list.d/poulsbo-graphics-alberto-milone.list
+sudo echo 'deb http://ppa.launchpad.net/albertomilone/poulsbo-graphics/ubuntu jaunty main ' >> /etc/apt/sources.list.d/poulsbo-graphics-alberto-milone.list

sudo echo 'deb-src http://ppa.launchpad.net/albertomilone/poulsbo-graphics/ubuntu jaunty main' >> /etc/apt/sources.list.d/poulsbo-graphics-alberto-milone.list
}}}
 0. Aggiungere le chiavi{{{
sudo apt-key adv --keyserver keyserver.ubuntu.com --recv-keys C6598A30

sudo apt-key adv --keyserver keyserver.ubuntu.com --recv-keys 99C0198F

sudo apt-get update

sudo apt-get install  dkms fakeroot

sudo apt-get install libdrm-poulsbo1

sudo apt-get install poulsbo-driver-2d poulsbo-driver-3d psb-firmware
-Linea 18:
+Linea 30:
-'''Keys for PPAs'''
{{{
apt-key adv --keyserver keyserver.ubuntu.com --recv-keys C6598A30
+. Installare i pacchetti `psb-kernel-*`{{{
sudo dpkg -i psb-kernel-*
-Linea 22:
+Linea 33:
-apt-key adv --keyserver keyserver.ubuntu.com --recv-keys 99C0198F
+sudo echo "blacklist i915" >> /etc/modprobe.d/blacklist.conf
-Linea 24:
+Linea 35:
-apt-get update

apt-get install  dkms fakeroot

apt-get install libdrm-poulsbo1

apt-get install poulsbo-driver-2d poulsbo-driver-3d psb-firmware
+sudo update-initramfs -u
-Linea 33:
+Linea 38:
-'''Install downloaded psb-kernel-* packages'''
{{{
dpkg -i psb-kernel-*

echo "blacklist i915" >> /etc/modprobe.d/blacklist.conf

update-initramfs -u
}}}


'''Create xorg.conf with following content and whitelist psb in /usr/bin/compiz by adding "psb" to the WHITELIST line.'''
{{{
+. Con un editor di testo ed i privilegi amministrativi creare il file `/etc/X11/xorg.conf`  ed incollare in questo le seguenti righe:{{{
-Linea 59:
+Linea 53:
+with following content and whitelist psb in /usr/bin/compiz by adding "psb" to the WHITELIST line.'''
-Linea 65:
+Linea 60:
-== Poulsbo (GMA500) Support in Intrepid (8.10) and Jaunty (9.04) ==
-Linea 67:
+Linea 61:
-The drivers for the Poulsbo chipset are shipped in the ubuntu-mobile PPA.
+==  Supporto Poulsbo (GMA500) in Intrepid (8.10) e Jaunty (9.04) ==
-Linea 69:
+Linea 63:
-=== Add the ubuntu-mobile PPA ===
+I driver per il chipset Poulsbo contenuti in the ubuntu-mobile PPA.

=== Aggiungere il ubuntu-mobile PPA ===
-Linea 78:
+Linea 74:
-If you are using a kernel that you have compiled yourself, or are not using the latest kernel provided by either Intrepid or Jaunty, install the '''psb-kernel-source''' package (and make sure the headers for your kernel are available!) and then remove '''psb-modules'''.
+Se si posssiede un kernel che si è compilati da soli, oppure non si stà utilizzando l'ultimo kernel fornito per Intrepid o Jaunty, installare il pacchetto '''psb-kernel-source''' (e assicurarsi che gli header per il kernel siano disponibili) e rimuovere allora il pacchetto  '''psb-modules'''.
-Linea 82:
+Linea 78:
-Install poulsbo-driver-2d if you only require 2D, and poulsbo-driver-3d if you also require 3D acceleration to work. Make sure your user is a member of the video group before using 3D.
+Installare  poulsbo-driver-2d se si richiede solo il 2D, e poulsbo-driver-3d si desidera l'accelerazione 3D. Assicurarsi che l'utente sia membro del gruppo video prima di usare il 3D.
{{{
sudo adduser $USER video
}}}
-Linea 84:
+Linea 83:
-=== Common problems ===
+=== Problemi comuni ===
-Linea 86:
+Linea 85:
-==== X doesn't start ====
+==== Il server grafico X non si avvia ====
-Linea 88:
+Linea 87:
-Double check that the psb kernel module can be loaded into the running kernel by running '''modprobe psb'''.

==== Other problems? ====

If you're still having problems, please mail ubuntu-mobile@lists.ubuntu.com, and do not submit bug reports.
+Assicurarsi che il modulo del kernel psb sia stato caricato, digitando in un terminale: 
{{{
sudo modprobe psb
}}}