Wiki Ubuntu-it

Indice
Partecipa
FAQ
Wiki Blog
------------------
Ubuntu-it.org
Forum
Chiedi
Chat
Cerca
Planet
  • Pagina non alterabile
  • Informazioni
  • Allegati

Versione 6 del 01/05/2006 18.40.21

Nascondi questo messaggio

Guida all'installazione e configurazione di stampanti multifunzione Epson. La guida è stata testata per una stampante Epson Stylus DX4800, tuttavia non si esclude che possa risultare utile anche per le altre multifunzione della serie DX. Ogni commento o suggerimento è benvenuto !


Voglio condividere la mia esperienza prima che l'oblio la cancelli :-) Ieri sono riuscito ad installare e far vedere come scanner una Epson dx4800. Ho attinto le informazioni da qui http://khk.net/sane/libusb.html

Ho ottenuto il codice venditore e stampante digitando da console:

sudo sane-find-scanner

che ha restituito:

  # sane-find-scanner will now attempt to detect your scanner. If the
  # result is different from what you expected, first make sure your
  # scanner is powered up and properly connected to your computer.

  # No SCSI scanners found. If you expected something different, make sure that
  # you have loaded a SCSI driver for your SCSI adapter.
  # Also you need support for SCSI Generic (sg) in your operating system.
  # If using Linux, try "modprobe sg".

found USB scanner (vendor=0x04b8 [EPSON], product=0x0819 [USB2.0 MFP]) at libusb:001:002
  # Your USB scanner was (probably) detected. It may or may not be supported by
  # SANE. Try scanimage -L and read the backend's manpage.

  # Not checking for parallel port scanners.

  # Most Scanners connected to the parallel port or other proprietary ports
  # can't be detected by this program.

La linea n. 10 ("...found USb scanner...") contiene i codici da passare al backend aggiungendo al file /etc/hotplug/usb/libsane.usermap la riga:

# Epson Corp.|Stylus DX4800
libusbscanner             0x0003      0x04b8   0x0819    0x0000       0x0000       0x00         0x00            0x00            0x00            0x00
0x00               0x00000000

ed al file /etc/sane.d/epson.conf che riporto:

# epson.conf
#
# here are some examples for how to configure the EPSON backend
#
# SCSI scanner:
scsi EPSON
#
# Parallel port scanner:
#pio 0x278
#pio 0x378
#pio 0x3BC
#
# USB scanner:
# There are two different methods of configuring a USB scanner: libusb and the kernel module
# For any system with libusb support (which is pretty much any recent Linux distribution) the
# following line is sufficient. This however assumes that the connected scanner (or to be more
# accurate, it's device ID) is known to the backend. 
usb
usb 0x4b8 0x819
usb /dev/usbscanner0

Notate la riga usb 0x4b8 0x819 fornisce i codici costruttore e dispositivo e la riga usb /dev/usbscanner0 che punta al dispositivo a blocchi .

Ho creato un device a blocchi col comando:

sudo mknod /dev/usbscanner0 c 180 48

E ne ho cambiato gli attributi con:

sudo chmod 666 /dev/usbscanner0

Dopodiche' ho commentato tutte le voci del file /etc/sane.d/dll.conf meno la voce epson.

Ho lanciato xsane ed il gioco e' fatto :-)

Spero di essere stato utile. Ciao.


CategoryDaRevisionare