Wiki Ubuntu-it

Indice
Partecipa
FAQ
Wiki Blog
------------------
Ubuntu-it.org
Forum
Chiedi
Chat
Cerca
Planet
  • Pagina non alterabile
  • Informazioni
  • Allegati

Versione 1 del 25/05/2007 15.27.19

Nascondi questo messaggio

Questa guida si propone di esporre in modo chiaro e sintetico gli eventuali problemi che un utente di [K]Ubuntu potrebbe incontrare nell'installazione della distribuzione sul portatile HP Pavilion ZV6278EA. Per la stesura della guida si è utilizzato Kubuntu 7.04.

Rilevamento dell'hardware

Per verificare la corretta rilevazione dell'hardware del portatile, è sufficiente aprire un'istanza di terminale e digitare il seguente comando:

lspci

che restituirà una schermata simile alla seguente:

00:00.0 Host bridge: ATI Technologies Inc RS480 Host Bridge
00:01.0 PCI bridge: ATI Technologies Inc RS480 PCI Bridge
00:04.0 PCI bridge: ATI Technologies Inc RS480 PCI Bridge
00:13.0 USB Controller: ATI Technologies Inc IXP SB400 USB Host Controller
00:13.1 USB Controller: ATI Technologies Inc IXP SB400 USB Host Controller
00:13.2 USB Controller: ATI Technologies Inc IXP SB400 USB2 Host Controller
00:14.0 SMBus: ATI Technologies Inc IXP SB400 SMBus Controller (rev 10)
00:14.1 IDE interface: ATI Technologies Inc Standard Dual Channel PCI IDE Controller ATI
00:14.3 ISA bridge: ATI Technologies Inc IXP SB400 PCI-ISA Bridge
00:14.4 PCI bridge: ATI Technologies Inc IXP SB400 PCI-PCI Bridge
00:14.5 Multimedia audio controller: ATI Technologies Inc IXP SB400 AC'97 Audio Controller (rev 01)
00:14.6 Modem: ATI Technologies Inc ATI SB400 - AC'97 Modem Controller (rev 01)
00:18.0 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] HyperTransport Technology Configuration
00:18.1 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Address Map
00:18.2 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] DRAM Controller
00:18.3 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Miscellaneous Control
01:05.0 VGA compatible controller: ATI Technologies Inc ATI Radeon XPRESS 200M 5955 (PCIE)
03:00.0 FireWire (IEEE 1394): Texas Instruments TSB43AB22/A IEEE-1394a-2000 Controller (PHY/Link)
03:02.0 Network controller: Broadcom Corporation BCM4318 [AirForce One 54g] 802.11g Wireless LAN Controller (rev 02)
03:04.0 CardBus bridge: Texas Instruments PCIxx21/x515 Cardbus Controller
03:04.3 Mass storage controller: Texas Instruments PCIxx21 Integrated FlashMedia Controller
03:04.4 Generic system peripheral [0805]: Texas Instruments PCI6411/6421/6611/6621/7411/7421/7611/7621 Secure Digital Controller
03:06.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ (rev 10)

Processore

Per visualizzare i dettagli sul processore, aprire in lettura il file /proc/cpuinfo digitando in un terminale:

cat /proc/cpuinfo

che restituirà una schermata simile alla seguente:

processor       : 0
vendor_id       : AuthenticAMD
cpu family      : 15
model           : 47
model name      : AMD Athlon(tm) 64 Processor 3500+
stepping        : 2
cpu MHz         : 2200.000
cache size      : 512 KB
fdiv_bug        : no
hlt_bug         : no
f00f_bug        : no
coma_bug        : no
fpu             : yes
fpu_exception   : yes
cpuid level     : 1
wp              : yes
flags           : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush mmx fxsr sse sse2 syscall nx mmxext fxsr_opt lm 3dnowext 3dnow up pni lahf_lm ts fid vid ttp tm stc
bogomips        : 4391.72
clflush size    : 64

Riconoscimento dei componenti

I componenti del portatile sono stati riconosciuti, ad eccezione ad esempio del modem integrato.

Configurazione dei componenti

Scheda video ATI Radeon Xpress 200M

Perfettamente riconosciuta, per poter usufruire dell'accelerazione 3D si segua la guida: ["Abilitare3DAti"]

Scheda wireless Broadcom 4318

Su Ubuntu 7.04, per quanto la BCM4318 sia riconosciuta, i driver del kernel non funzionano.

Personalmente ho provato tre diversi metodi per aggirare tale problema

Metodo 1) installare il pacchetto bcm43xx-fwcutter presente nei repository di feisty e dare l'OK alle domande poste dal tool.

Metodo 2) installare il pacchetto bcm43xx_compwiz18.1-all.deb contenuto a sua volta nell'archivio [http://forum.ubuntu-it.org/index.php?action=dlattach;topic=81192.0;attach=10455 bcm43xx_compwiz18.1-all.tar].

Metodo 3) utilizzare ["http://wiki.ubuntu-it.org/Hardware/Wireless/Ndiswrapper"] seguendo la guida. NB: i windriver reperibili per questa periferica sono a 32bit e per tale motivo potrete avere qualche problema con [K]Ubuntu a 64bit

Scheda audio

Riconosciuta perfettamente. Non sono necessarie configurazioni.

Modem 56k

Non è stato possibile configurarlo. I driver della periferica sono i [:Hardware/Modem/Dialup/Conexant:conexant] (proprietari, a pagamento).

CardBus bridge Texas Instruments

Per il lettore di schede di memoria ho adottato questo metodo:

lspci | grep Mass

otterrete una cosa simile

03:04.3 Mass storage controller: Texas Instruments PCIxx21 Integrated FlashMedia Controller

A questo punto andate a settare il lettore attraverso

sudo setpci -s nn:nn.n 4c.b=0x02

dove al posto di nn:nn.n inserirete i numeri che vi darà l'inizio della riga precedentemente visualizzata. Nel mio caso 03:04.3

Ora non vi resta altro da fare che inserire una SD o MMC o altro supporto per provare il lettore

Hard disk

Riconosciuto, con tutte le partizioni. Se volete abilitare la scrittura su NTFS, utilizzate [:Hardware/DispositiviPartizioni/MontarePartizioni/NtfsLetturaScrittura:NTFS-3G].

Masterizzatore DVD

Riconosciuto. Verificata la corretta masterizzazione di CD e DVD.

Display 15.4"

Perfettamente riconosciuto, ed alla risoluzione di 1280x800.

Porte USB 2

Riconosciute, correttamente funzionanti.

Mouse Integrato

Perfettamente riconosciuto.

Tasti rapidi

Per i tasti rapidi date da shell

systemsettings

Nella finestra che si apre, cliccate Tastiera & Mouse ---> Scorciatoie della tastiera ---> Scorciatoie comandi e vi apparirà l'editor del menu di KDE. Da li scegliete le applicazioni che vorrete lanciare con i tasti di avvio veloce Esempio: andate su Multimedia ---> Kaffeine ed in basso selezionate "Personalizza". Apparirà una finestrella e a questo punto premete il bottone che vorrete utilizzare per avviare Kaffeine, nel mio caso e credo anche nel vostro caso, il bottoneDVD. Potrete usare questo esempio per configurare tutti gli altri tasti per avviare ad esempio Amarok, Firefox o Konqueror ed altri programmi

Configurazione Xorg

Un esempio di file /etc/X11/xorg.conf, utile in caso di problemi nella configurazione:

        Section "ServerLayout"
        Identifier     "Default Layout"
        Screen      0  "aticonfig-Screen[0]" 0 0
        InputDevice    "Generic Keyboard"
        InputDevice    "Configured Mouse"
        InputDevice    "stylus" "SendCoreEvents"
        InputDevice    "cursor" "SendCoreEvents"
        InputDevice    "eraser" "SendCoreEvents"
        InputDevice    "Synaptics Touchpad"
EndSection

Section "Files"

        # path to defoma fonts
        FontPath     "/usr/share/X11/fonts/misc"
        FontPath     "/usr/share/X11/fonts/cyrillic"
        FontPath     "/usr/share/X11/fonts/100dpi/:unscaled"
        FontPath     "/usr/share/X11/fonts/75dpi/:unscaled"
        FontPath     "/usr/share/X11/fonts/Type1"
        FontPath     "/usr/share/X11/fonts/100dpi"
        FontPath     "/usr/share/X11/fonts/75dpi"
        FontPath     "/usr/share/fonts/X11/misc"
        FontPath     "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType"
EndSection

Section "Module"
        Load  "i2c"
        Load  "bitmap"
        Load  "ddc"
        Load  "dri"
        Load  "extmod"
        Load  "freetype"
        Load  "glx"
        Load  "int10"
        Load  "type1"
        Load  "vbe"
EndSection

Section "InputDevice"
        Identifier  "Generic Keyboard"
        Driver      "kbd"
        Option      "CoreKeyboard"
        Option      "XkbRules" "xorg"
        Option      "XkbModel" "pc105"
        Option      "XkbLayout" "it"
        Option      "XkbOptions" "lv3:ralt_switch"
EndSection

Section "InputDevice"
        Identifier  "Configured Mouse"
        Driver      "mouse"
        Option      "CorePointer"
        Option      "Device" "/dev/input/mice"
        Option      "Protocol" "ExplorerPS/2"
        Option      "ZAxisMapping" "4 5"
        Option      "Emulate3Buttons" "true"
EndSection

Section "InputDevice"
        Identifier  "Synaptics Touchpad"
        Driver      "synaptics"
        Option      "SendCoreEvents" "true"
        Option      "Device" "/dev/psaux"
        Option      "Protocol" "auto-dev"
        Option      "HorizScrollDelta" "0"
EndSection

Section "InputDevice"

                                                      # /dev/input/event
                                                      # for USB
        Identifier  "stylus"
        Driver      "wacom"
        Option      "Device" "/dev/wacom"          # Change to 
        Option      "Type" "stylus"
        Option      "ForceDevice" "ISDV4"               # Tablet PC ONLY
EndSection

Section "InputDevice"

                                                      # /dev/input/event
                                                      # for USB
        Identifier  "eraser"
        Driver      "wacom"
        Option      "Device" "/dev/wacom"          # Change to 
        Option      "Type" "eraser"
        Option      "ForceDevice" "ISDV4"               # Tablet PC ONLY
EndSection

Section "InputDevice"

                                                      # /dev/input/event
                                                      # for USB
        Identifier  "cursor"
        Driver      "wacom"
        Option      "Device" "/dev/wacom"          # Change to 
        Option      "Type" "cursor"
        Option      "ForceDevice" "ISDV4"               # Tablet PC ONLY
EndSection

Section "Monitor"
        Identifier   "Generic Monitor"
        Option      "DPMS"
EndSection

Section "Monitor"
        Identifier   "aticonfig-Monitor[0]"
        Option      "VendorName" "ATI Proprietary Driver"
        Option      "ModelName" "Generic Autodetecting Monitor"
        Option      "DPMS" "true"
EndSection

Section "Device"
        Identifier  "ATI Technologies, Inc. Radeon Xpress 200M (RS480)"
        Driver      "ati"
        BusID       "PCI:1:5:0"
EndSection

Section "Device"
        Identifier  "aticonfig-Device[0]"
        Driver      "fglrx"
        Option      "VideoOverlay" "on"
        Option      "OpenGLOverlay" "off"
EndSection

Section "Screen"
        Identifier "Default Screen"
        Device     "ATI Technologies, Inc. Radeon Xpress 200M (RS480)"
        Monitor    "Generic Monitor"
        DefaultDepth     24
        SubSection "Display"
                Depth     1
                Modes    "1280x800"
        EndSubSection
        SubSection "Display"
                Depth     4
                Modes    "1280x800"
        EndSubSection
        SubSection "Display"
                Depth     8
                Modes    "1280x800"
        EndSubSection
        SubSection "Display"
                Depth     15
                Modes    "1280x800"
        EndSubSection
        SubSection "Display"
                Depth     16
                Modes    "1280x800"
        EndSubSection
        SubSection "Display"
                Depth     24
                Modes    "1280x800"
        EndSubSection
EndSection

Section "Screen"
        Identifier "aticonfig-Screen[0]"
        Device     "aticonfig-Device[0]"
        Monitor    "aticonfig-Monitor[0]"
        DefaultDepth     24
        SubSection "Display"
                Viewport   0 0
                Depth     24
        EndSubSection
EndSection

Section "DRI"
        Mode         0666
EndSection

Section "Extensions"
        Option      "Composite" "Disable"
EndSection